No. 4 (2025): Scientific Journal of Metinvest Polytechnic. Series: Technical sciences

DOI: https://doi.org/10.32782/3041-2080/2025-4

Published: 2025-08-26

Full Issue

Завантажити номер одним файлом (Українська)

ENVIRONMENTAL PROTECTION TECHNOLOGIES

ASSESSMENT OF THE HYDROCHEMICAL COMPOSITION OF QUARRY WATERS IN THE ZONE OF ACTIVITY OF PRJSC “TRANSNATIONAL CORPORATION GRANIT”

Vasyl’ Bondarchuk, Ruslana Valerko, Liudmyla Herasymchuk

11-18
- PDF (Українська)
APPLICATION OF PEAT FROM DEPOSITS OF POLTAVA REGION AS A COMPONENT OF COMPOSITE FUEL BASED ON COMBUSTIBLE FRACTIONS OF HOUSEHOLD WASTE

Yurii Holik, Tetiana Serha

19-23
- PDF (Українська)
ENVIRONMENTAL RISK OF HOUSEHOLD WASTE ACCUMULATION AT THE ZHYTOMYR CITY LANDFILL IN THE PERIOD FROM 2018–2024 YEARS

Liudmyla Ivanivna Demchuk, Maria Bronislavivna Korbut, Iryna Volodymyrivna Davydova, Oksana Nikolaevna Alpatova, Vitalina Petrivna Kalenska, Nataliia Mykolaivna Rusetska

24-33
- PDF
STUDYING THE POTENTIAL OF BIOTECHNOLOGY TO USE IT IN ENVIRONMENTAL PROTECTION TECHNOLOGIES

Vasil Dyachok, Yaroslav Venher, Liubov Venher

34-39
- PDF (Українська)
THE ROLE OF TECTONIC FACTORS IN IMPROVING THE ENVIRONMENTAL SAFETY OF TAILINGS PONDS

Olga Orlinska, Dmytro Pikarenia, Dmytro Rudakov, Leonid Rudakov, Pavlo Podopryhora

40-49
- PDF (Українська)
INFLUENCE OF CLIMATIC FACTORS ON THE EFFICIENCY OF SURFACE RUNOFF TREATMENT USING ECOTECHNOLOGIES

Ievgenii Ponomarenko, Yurii Kovalenko

50-55
- PDF (Українська)
DIGITAL MODELLING AS A TOOL FOR REFINING THE DESIGN PARAMETERS OF A METALWORKING WORKSHOP VENTILATION SYSTEM

Yurii Cheberiachko, Nataliia Maksymova, Anton Podobnyi

56-61
- PDF (Українська)

AUTOMATION, COMPUTER-INTEGRATED TECHNOLOGIES AND ROBOTICS

THE SYSTEM FOR REMOTE STATE MONITORING OF AN INDUSTRIAL ROBOT

Olha Baranova, Mykola Yefymenko, Natalia Myronova, Denys Molochkov, Tatiana Kulyaba-Kharytonova

62-70
- PDF (Українська)
INTEGRATING CAD WITH 3D PRINTING TECHNOLOGIES TO ACCELERATE ENGINEERING PROTOTYPING

Svitlana Hurkovska

71-76
- PDF (Українська)
THEORETICAL FOUNDATIONS OF AUTOMATION OF CORPORATE REPUTATION CONTROL

Oleg Vitaliyovych Davydenko, Oleksiy Oleksandrovych Koyfman

77-86
- PDF
ARTIFICIAL INTELLIGENCE FOR CONTROLLING THE OPERATIONAL EFFICIENCY OF METALLURGICAL ENTERPRISES: A REVIEW OF MODERN APPROACHES, TECHNOLOGIES, AND CHALLENGES

Sergiy Viktorovich Detyuk, Oleksiy Oleksandrovych Koyfman

87-93
- PDF
AUTOMATION OF STRENGTH CALCULATION FOR BEAM STRUCTURES

Alexander Kostikov, Yurii Kholodnyak, Pavlo Sahaida

94-102
- PDF (Українська)
XGBOOST HYPERPARAMETER OPTIMIZATION FOR INTELLIGENT B2B ORDER FORECASTING SYSTEMS

Serhii Miroshnychenko

103-112
- PDF (Українська)
INTELLIGENT MODEL OF INVENTORY MANAGEMENT BASED ON GENETIC ALGORITHMS AND FUZZY LOGIC FOR IMPROVING THE ECONOMIC SECURITY OF AN ENTERPRISE

Oleksandr Podskrebko, Nadiia Ivanchenko, Volodymyr Kudin, Yurii Samokhvalov

113-118
- PDF (Українська)
SUPERVISORY CONTROL WITH INCREMENTAL CHANGE OF REGULATOR COEFFICIENTS

Oleksii Razzhyvin, Artem Zaliatov, Tymur Serdiuk, Mykhailo Ilinskyi

119-125
- PDF (Українська)
ANALYSIS OF EXTERNAL AND INTERNAL INTERFERENCES OPERATING IN METALLURGICAL PRODUCTION

Oleg Subotin, Stepan Sus, Yaroslav Petrukhin

126-133
- PDF (Українська)
IMPROVING THE QUALITY OF GRAIN TRANSPORTATION DURING ELEVATOR TRANSPORT ROUTE ROUTING

Sergiy Tymchuk, Vitalii Mardziavko, Andrii Rudenko

134-142
- PDF (Українська)
CONSTRUCTION PRINCIPLES OF ROLLER-BIT DRILLING RIGS DRIVE SYSTEMS FOR KRYVYI RIH QUARRIES

Victor Serhiiovytch Khilov, Viktor Vasilyevich Dyfort, Sergey Volodymyrovych Pavlyshyn, Olena Yurivna Pavlyshyna

143-147
- PDF
USING THE INDUSTRIAL INTERNET OF THINGS (IIOT) TO OPTIMISE ENERGY EFFICIENCY AT ENTERPRISES

Inna Yuschuk, Pavlo Yuschuk

148-152
- PDF (Українська)

MATERIALS SCIENCE

IMPROVING THE OPERATIONAL STABILITY OF PARTS BY THE METHOD OF COMBINED PROCESSING

Olena Berezshna, Svetlana Malyhina, Valeriy Kassov, Dmytro Turchanin, Maksym Berezhniy

153-157
- PDF (Українська)
STUDY OF THE INFLUENCE OF PLASTIC DEFORMATION ON THE PROPERTIES AND STRUCTURE OF STEEL AFTER HEAT TREATMENT

Mykola Bosyi, Olena Bosа

158-166
- PDF (Українська)
OPTIMIZATION OF TECHNOLOGICAL PRESSING REGIMES FOR ORGANOPLASTICS USING EXPERIMENTAL DESIGN

Olha Naberezhna, Yekaterina Yeriomina

167-173
- PDF (Українська)

METALLURGY

AUTOMATED DESIGN OF ROLLING MODES IN EDGER ROLLS

Eduard Gribkov, Yurii Dobronosov, Olexander Kalenkov, Oleg Buturlin

174-179
- PDF (Українська)
FLOTATION OF NON-METALLIC INCLUSIONS DURING PURGE OF LIQUID STEEL WITH ARGON

Veronika Yefimova, Yuliya Skorobagatko

180-186
- PDF (Українська)
FORMATION OF METAL DROPLETS IN THE SLAG OF A TUNDISH DURING INERT GAS PURGING

Veronika Yefimova, Igor Navolniev

187-193
- PDF (Українська)
INVESTIGATION OF THE INFLUENCE OF TEMPERATURE REGIME AND GASEOUS ENVIRONMENT ON THE SERVICEABILITY OF GRATE BARS DURING IRON ORE PELLET ROASTING

Andrii Ivanov, Hanna Panchenko, Nataliia Suslo, Yelyzaveta Huk

194-200
- PDF (Українська)
INTEGRATION OF SUSTAINABLE DEVELOPMENT PRINCIPLES AND ESG REQUIREMENTS INTO MODERNISATION PROJECTS OF UKRAINIAN MINING AND METALLURGICAL ENTERPRISES

Olena Latysheva, Viktoriia Rovenska, Iryna Smyrnova

201-210
- PDF (Українська)
DETERMINATION OF A RATIONAL TEMPERATURE AND SPEED REGIME FOR CASTING ALLOYED CHROMIUM STEELS

Kostiantyn Niziaiev, Oleksandr Stoianov, Khrystyna Malii, Yevhen Synehin, Volodymyr Ruban

211-217
- PDF (Українська)
COMPARATIVE ANALYSIS OF RAPID PROTOTYPING METHODS: 3D PRINTING AND CASTING USING HYDROCOLLOID AND SILICONE ELASTIC MOLDS

Olha Serhiienko

218-222
- PDF (Українська)
DIGITAL SOLUTION FOR ROLL PASS DESIGN PROCESS OF SIMPLE PROFILES

Maksym Shtoda, Ruslan Pavliuk

223-228
- PDF (Українська)

INDUSTRIAL ENGINEERING

RESEARCH ON THE INFLUENCE OF FORGING PARAMETERS ON THE SHAPE OF THE FORGING

Oleksandr Duvanskyi, Vitaliy Chukhlib

229-234
- PDF (Українська)
INTELLIGENT EQUIPMENT COMPLEX MANAGEMENT SYSTEM WITH FAILURE PREDICTION

Olena Nalobina, Mykola Holotiuk, Oleg Bundza, Andrii Shymko, Taras Pylypaka

235-240
- PDF (Українська)
SYSTEM OF REMOTE CONTROL AND MONITORING OF THE TECHNICAL CONDITION OF THE MOBILE COMPLEX OF MACHINES

Olena Nalobina, Mykola Holotiuk, Oleg Bundza, Andrii Shymko, Oksana Valetska

241-245
- PDF (Українська)
CRANKSHAFT FORGING, TAKING INTO ACCOUNT THE IMPACT OF DEFORMATION MODES ON THE QUALITY OF FORGINGS

Volodymyr Paliienko, Vitalii Chukhlib

246-253
- PDF (Українська)
RUBBER CRUMB AS A DAMPING MATERIAL IN RAILCAR MANUFACTURING: IMPLEMENTATION PROSPECTS AND MODELING

Oleksiy Fomin, Oleksandr Kozynka, Ivan Kulbovskyi, Vladyslav Martynenko, Dmytro Martynenko

254-264
- PDF (Українська)
THEORETICAL PRINCIPLES OF CAM MECHANISMS OPTIMIZATION IN TRANSPORT POWER PLANTS

Oleksiy Fomin, Oleksandr Lohvinenko, Sergii Sagin, Oleksandr Bursuk, Volodymyr Muraviov

265-273
- PDF (Українська)

MINING

DETERMINATION OF THE EFFECT OF SEQUENTIAL CLASSIFICATION ON THE EFFICIENCY OF PRIMARY CLASSIFICATION IN THE GRINDING OF MAGNETITE QUARTZITES

Yevhen Bezsmertnyi, Tetiana Oliinyk

274-280
- PDF (Українська)
CONSTRUCTION OF THE TRAP THEORY

Ruslan Vladymyrov

281-286
- PDF (Українська)
SOIL-CONCRETE FASTENING OF UNDERGROUND STRUCTURES

Hennadii Haiko, Anatolii Han, Ivan Matviichuk

287-294
- PDF (Українська)
ADAPTIVE MANAGEMENT OF COMPREHENSIVE MECHANIZATION PARAMETERS FOR OPEN PIT MINING OPERATIONS UNDER CHANGING CUT-OFF GRADE OF MINERAL RESOURCE

Yulian Hryhoriev, Davyd Pylypchuk, Volodymyr Lebedenko, Serhii Lutsenko, Yurii Peregudov

295-300
- PDF (Українська)
REQUIREMENTS FOR COMPUTER EQUIPMENT PARAMETERS WHEN PROCESSING DIGITAL TERRESTRIAL IMAGES

Oleksandr Dolhikh, Liubov Dolhikh

301-306
- PDF (Українська)
INTEGRATION OF SIMULATIONS AND MATHEMATICAL MODELING IN THE TRAINING OF MINING SPECIALISTS: EXPERIENCE AND PROSPECTS

Nataliia Kaidan, Vadym Kaidan, Nataliia Hrudkina, Vladyslav Velychko, Olena Fedorenko

307-315
- PDF (Українська)
DEVELOPMENT OF AN INTEGRATED METHODOLOGY FOR 3D MODELING OF LANDSLIDE PROCESSES USING TERRESTRIAL LASER SCANNING AND GNSS MEASUREMENTS

Dmytro Mitchenko

316-321
- PDF (Українська)
DETERMINATION OF THE SPECIMEN’S MINIMUM WEIGHT DURING THE ORE MASS TEST

Ihor Mladetskyi, Kostiantyn Levchenko, Svitlana Sakhno, Ivan Cheberiachko, Volodymyr Suzdal

322-328
- PDF (Українська)
DETERMINING THE REQUIRED ORE GRINDING SIZE

Ihor Mladetskyi, Kostiantyn Levchenko, Ivan Cheberiachko, Dina Mykhailova

329-332
- PDF (Українська)

CIVIL SECURITY

APPLICATION OF DECISION-MAKING CRITERIA TO IMPROVE THE STAFFING OF THE OCCUPATIONAL SAFETY MANAGEMENT SYSTEM AT THE ENTERPRISE

Oleg Kruzhilko, Mykola Repin, Serhiy Cheberyachko, Yuriy Cheberyachko, Volodymyr Maistrenko

333-339
- PDF (Українська)
DEVELOPMENT OF A COMFORT LEVEL MANAGEMENT SYSTEM FOR UNDERGROUND OPEN SPACE PREMISES

Tetyana Negriy, Serhiy Bubon

340-345
- PDF (Українська)
HYGIENIC ASSESSMENT OF ASBESTOS IMPACT ON OCCUPATIONAL HEALTH AND MANAGEMENT OF OCCUPATIONAL RISKS AMONG FIREFIGHTERS AND RESCUE WORKERS

Bohdan Tsymbal, Olena Sharovatova, Vitalii Hilpert

346-357
- PDF (Українська)
ENTROPY OF SAFETY IN THE OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM

Vitaly Tsopa, Sergey Cheberyachko, Oleg Deryugin, Natalia Volodchenkova, Mykola Repin

358-369
- PDF (Українська)
SOCIO-PSYCHOLOGICAL ASPECTS OF DEVELOPMENT OF EMPLOYEE SAFETY CULTURE

Olena Sharovatova, Bohdan Tsymbal, Vitalii Hilpert

370-376
- PDF (Українська)